Emergency Generator Repair in Louisiana
A standby generator that fails during an outage needs a technician who carries the part. Optimize repairs Generac generators across Louisiana with factory-trained technicians, a stocked parts warehouse, a fleet of service vehicles and 24/7 support.
Why It Matters
Why Timely Generator Repair Matters
Repair is the other half of our service department: active generator failures, diagnostic fault codes, component replacement and systems not operating as designed. Our technicians diagnose the whole system, not just the engine: the battery that cranks it, the fuel supply that feeds it, the transfer switch that moves your home onto generator power and the controller behind it all.
Preventative maintenance identifies small issues, like battery degradation, airflow restrictions or sensor faults, before they become major failures. A repair made before the storm is finished before the next outage rather than during it. Our warehouse is stocked with Generac repair parts, so a common failure does not wait on a shipment.
Warning Signs
Signs Your Generator Needs Repair
Small issues show up before the storm does. Call Service if you notice any of these:
Why Optimize
Rapid, Reliable Repair by Factory-Trained Experts
Founded in Baton Rouge in 2010, Optimize has installed more than 8,000 generators across Louisiana, and the technicians who repair them work for Optimize.
Factory-Trained Technicians
Every repair is done by our own factory-trained, certified technicians. No subcontractors, no handoffs.
Parts on the Service Van
Our warehouse holds a large inventory of genuine Generac repair parts, and our specialized fleet of service vehicles carries what most visits need, so a common failure does not wait on a shipment or a return visit.
Generac Prestige Dealer
Generac Prestige is the highest level of Generac dealer certification, earned for expert installation and service. We specialize in the complete Generac line, from 10kW home units to 150kW commercial systems.
How It Works
Our Simple Generator Repair Process
Our service process is designed to be clear, consistent and dependable.
You Call, We Schedule
Call Service 24/7 or request service online, and tell us the model and what the generator is doing. That is usually enough for the technician to arrive with the likely part on the van.
We Inspect and Evaluate
The technician completes a full system inspection and evaluation: battery, fuel supply, transfer switch, controller history and a test run, to find the actual cause rather than the symptom. You get a clear explanation of the findings and your options before any work is performed.
We Repair, Test and Document
We carry out the repair, run full system testing to confirm proper operation, and document the service history and future maintenance needs for your records.
Emergency Service
Emergency Generator Repair, Around the Clock
Outages do not keep business hours, and neither does our support line. Call Service at (800) 927-4832 at any hour. We maintain a large inventory of generator repair parts in our warehouse and run a specialized fleet of service vehicles, so there is no long wait for parts or a return visit: if the part is on the service vehicle, we fix it on the spot.
Service members hold priority scheduling, which is what moves them to the front of the queue after a storm.
We repair residential and commercial generators, the complete Generac line from 10kW home units to 150kW commercial systems.
What We Fix
Common Generator Repairs
Most repair calls come down to a handful of components. Our technicians carry the parts these repairs need, so most are finished in a single visit.
Battery Testing & Replacement
A weak or degraded battery is the most common reason a standby generator will not start. We test the battery and the charging system and replace what has failed, with batteries stocked on the service van.
Transfer Switch Faults
The automatic transfer switch senses the outage and moves your home onto generator power, then back to the utility when it returns. We test it with a simulated outage, repair or replace it, and show you how to perform a manual transfer if it ever fails.
Fuel System Problems
A generator that starts and then stalls often has a fuel supply problem. We check the fuel system from the gas line to the regulator and correct what is starving the engine.
Diagnostics & Fault Codes
The control panel logs fault codes, run hours and maintenance schedules. We read the history, troubleshoot the fault and update or replace the controller when the board itself has failed.
Oil, Filters & Spark Plugs
Overdue oil, a clogged filter or worn spark plugs will shut a generator down to protect itself. We service all three and inspect cooling and airflow, so the engine runs the way it was designed to.
Sensors & Component Replacement
Sensor faults, airflow restrictions and worn components surface during diagnostics. We replace the failed part with genuine Generac parts from our warehouse rather than clearing the alarm and leaving.
Fewer Repairs
Most Repairs Are Preventable
Routine maintenance greatly reduces the likelihood of emergency repairs and helps make sure your generator is ready before an outage occurs. Preventative maintenance identifies small issues, like battery degradation, airflow restrictions or sensor faults, before they become major failures, and it is also what keeps your manufacturer and dealer warranty active. Eligible Generac air-cooled units installed by Optimize carry the Power Plus Warranty: 12 Years of Full Coverage at no extra cost.
Reviews
Trust the Optimize Difference
What We Repair
We Repair Generac Generators
Generators installed by other providers can still be inspected, serviced and maintained by our technicians. Call Service to check your model.
FAQs
Frequently Asked Questions About Generator Repair
Common questions about generator repair and emergency service
Do you repair generators you did not install?
Yes. We sell, install and repair Generac generators, and generators installed by other providers can still be inspected, serviced and maintained by our technicians. Tell us the brand, the model and what the unit is doing when you call, so the technician arrives prepared.
What types of faults do you repair?
Active generator failures, diagnostic fault codes, component replacement and systems not operating as designed: battery and charging failures, transfer switch faults, fuel supply problems, controller faults, oil, filter and spark plug service, cooling and airflow restrictions, and sensor faults. We repair residential and commercial Generac generators.
My generator will not start. What is the most likely cause?
Battery degradation, more often than anything else. A fuel supply problem, a sensor fault or a controller fault can produce the same symptom, so the technician runs full system diagnostics before replacing anything.
The generator is running but my home has no power. Why?
That usually points at the automatic transfer switch, which senses the outage and moves your home from utility power onto the generator. If it fails, a manual transfer gets the lights on until we arrive, and we test and repair the switch on site.
Do you offer emergency generator repair?
Support is available 24/7. Call Service at (800) 927-4832 at any hour, and service members get priority scheduling.
How do I keep repairs to a minimum?
Have the generator serviced every year. Preventative maintenance catches battery degradation, airflow restrictions and sensor faults while they are still small, and it keeps your warranty active. See our generator maintenance page.
Where do you provide generator repair?
Across Louisiana, from our four locations in Baton Rouge, Covington, Lafayette and New Orleans. Choose your area on our Louisiana service area page.
Coverage
Generator Repair Across Louisiana
24/7 Support
Generator Down? Get It Fixed.
Factory-trained technicians, a stocked Generac parts warehouse, a fleet of service vehicles and 24/7 support across Louisiana. Call Service at (800) 927-4832 or request your repair online.